Atmega1280V programming connector query

Discussion in 'Embedded Systems and Microcontrollers' started by embedded.world, May 26, 2014.

  1. embedded.world

    Thread Starter Member

    Feb 27, 2014
    36
    0
    I have got one Atmega1280V board with programming connector with pin connections as follows
    1. Pin1 : gnd
    2. Pin2 : reset
    3. Pin3 : PB1 SCK/PCINT1 (SPI Bus Serial Clock or Pin Change Interrupt 1)
    4. Pin4 : MOSI/PCINT2 (SPI Bus Master Output/Slave Input or Pin Change Interrupt 2)
    5. Pin5 : MISO/PCINT3 (SPI Bus Master Input/Slave Output or Pin Change Interrupt 3)


    What kind of debugger/programmer should be connected here. IO have to identify that programmer/debugger.
     
  2. MrChips

    Moderator

    Oct 2, 2009
    12,414
    3,353
  3. embedded.world

    Thread Starter Member

    Feb 27, 2014
    36
    0
    This board is pre-assembled & have programmer connector containg SPI port. That's why I have asked which debugger/programmer to choose.

    Debugger like AVR-One support JTAG
     
Loading...