Amplify and transmit RF signals

Discussion in 'The Projects Forum' started by baronobeefdip, Sep 14, 2014.

  1. baronobeefdip

    Thread Starter New Member

    Jan 24, 2013
    11
    3
    I have an RF modulator for a Television (Composite to Coaxial) that I am hooking up a raspberry pi to, I want to be able to take the outgoing rf signal from the modulator, then amplify it and transmit it to TV receivers in my house, I don't want to put up with wires and this is the only way I plan on going about all of this. What device should I use to transmit the RF signals being created by the modulator or what circuit design do you suggest.
     
  2. Lestraveled

    Well-Known Member

    May 19, 2014
    1,957
    1,215
    You may have enough output from the modulator to do it without an amplifier. Is the modulator a UHF or a VHF model?
     
Loading...