7448 seven segment display!

Discussion in 'General Electronics Chat' started by B-Sparkes, Dec 28, 2010.

  1. B-Sparkes

    B-Sparkes Thread Starter New Member

    Joined:
    Dec 28, 2010
    3
    0
    A circuit converts a 4 bit binary input into a seven segment display output.

    I have to use a 7448 and simulate the circuit using either multisimm or proteus.
    also setting up a word generator to produce a count on the seven segment display from 0 to 9.
    Attach a logic analyser to the output to display the count in timing diagram form. the

    Connecting form the 7448 to the seven segment is not a problem but the rest I do not have a clue where to start is there any information that you or any body could share with me on this?

    Regards

    Brian

     
    #1
  2. hgmjr

    hgmjr Moderator

    Joined:
    Jan 28, 2005
    9,030
    210
    If this is a class assignment then I will move it to the homework forum.

    hgmjr
     
    #2
  3. beenthere

    beenthere Retired Moderator

    Joined:
    Apr 20, 2004
    15,815
    273
    You might as well get the terminology correct - a 7448 is a BCD to 7 segment decoder. It has active high outputs, so it works with common cathode displays.
    A BCD counter would be the thing to use.
     
    #3
  4. marshallf3

    marshallf3 Well-Known Member

    Joined:
    Jul 26, 2010
    2,358
    200
    7446, 7447 & 7448 are specific to the displays, if you Google the part number with the word circuit after it you'll find a multitude of examples as you will with their individual datasheets which are also often filled with simple circuits &/or references to application notes.
     
    #4
Loading...