+24v to -24v/200mA Through hole inverter

Discussion in 'General Electronics Chat' started by Oussama Zaidi, May 18, 2016.

  1. Oussama Zaidi

    Thread Starter Member

    Mar 1, 2016
    53
    0
    Hi
    I need a through hole switching inverter, which convert +24V DC to -24V DC and can provide 200mA, all inverters that I found are surface mounting type and I need a through hole one, does anyone has an idea about that? thank you for helping.
     
  2. Bordodynov

    Active Member

    May 20, 2015
    637
    188
    TEN 50-2415
    Vin 18-36 VDC
    Vout=24V I/O isolation 1500 VDC !!!!
    Iout_max=2080mA
    1" x 2" x 0.4"
     
  3. Oussama Zaidi

    Thread Starter Member

    Mar 1, 2016
    53
    0
    Hi thank you for your response, but I need -24V not +24V.
     
  4. Bordodynov

    Active Member

    May 20, 2015
    637
    188
    The output terminals are galvanically isolated from the input (this is a 24V battery). Common wire connect to positive output. On the minus output will be -24V. With two modules, you will get + 24V and -24V (with an input voltage from 18V to 36V).
     
  5. AnalogKid

    Distinguished Member

    Aug 1, 2013
    4,515
    1,246
Loading...