Hello,
I want to hook up 10 LED lights to a motorcycle and would like to install it with 2 ways of powering. I would like to have a simple on/off switch to control all lights and I would also like to have a flasher/strobe modulator to turn on w/remote control. With the modulator I would have to separate the lights into 2 “channels” of 5 lights each in order to get the strobe effect. How can I separate the 2 inputs where the strobe effect will work properly and still have a separate on/off control of all the lights?
Thanks for your help,
Terry

 

That seems to be something we do not give advice about. We have established a set of guidelines limiting our assistance on such things:

2. Any homemade wiring modifications to signal or head lighting, or penetrations through the fierwall are not for discussion. The lighting function is to too critical for non-approved wiring and connectors. Many safety issues are involved. Preventing chafing in wires passing through driver-made holes is impossible to guarantee.