All About Circuits Forum  

Go Back   All About Circuits Forum > Electronics Forums > The Projects Forum

Notices

The Projects Forum Working on an electronics project and would like some suggestions, help or critiques? If you would like to comment or assist others with their projects, this is the place to do it.

Reply   Post New Thread
 
Thread Tools Display Modes
  #1  
Old 06-15-2011, 08:36 PM
sudheer9133 sudheer9133 is offline
New Member
 
Join Date: May 2011
Posts: 4
Default need the help in hardware for solar MPPT using perturb and observe

hi

im doing the project on MPPT for solar cells using perturb and observe method . in this im using the 12v solapanel and it has 0.4 amp current . i m boosting the voltage to 24 v . i had taken the 30mh inductor and 0.01 pf capacitor and the mosfetswitch which is controlled by the PIC 18F2550 micro controller. i want to control the switching by duty cycle.

im not geting the 24v at the output....im very poor in constructing the hardware.can anyone help me plz...ur help will be apprreciated....

thank you
Reply With Quote
  #2  
Old 06-15-2011, 09:05 PM
SgtWookie's Avatar
SgtWookie SgtWookie is offline
Expert Member
 
Join Date: Jul 2007
Location: In the vast midwest of the USA; CST
Posts: 22,030
Default

Without your schematic and source code being posted, we won't be of much help - just a lot of guessing.

However, 30mh is a VERY large inductor, and 0.01pF is less capacitance than you would get with typical parasitic capacitance - it's really too small of a value to measure without an expensive material analyzer ($15,000 - $30,000 USD).

Posting inaccurate values will not help either.
__________________
General info:
If you have a question, please start a thread/topic. I do not provide gratis assistance via PM nor E-mail, as that would violate the intent of this Board, which is sharing knowledge ... and deprives you of other knowledgeable input.
Reply With Quote
  #3  
Old 06-16-2011, 06:29 PM
sudheer9133 sudheer9133 is offline
New Member
 
Join Date: May 2011
Posts: 4
Default need help regarding my project

hi
thanks a lot for ur reply...i dont know how to calculate and which values for the components is use for my circuit ...can you please help me how to calculate the component values for the desired output for my project....below is my project diagram and suggest me with your tips

thank you..
Attached Images
File Type: jpg IMG-20110616-00051.jpg (301.8 KB, 22 views)
Reply With Quote
Reply   Post New Thread

Tags
, , , ,


Related Site Pages
Section Title
Video Lecture Capacitors (Part 2) - Current Flow in a Capacitive Circuit - Inductors,Capacitors,Transformers
Textbook Why L/R and not LR? : Rc And L/r Time Constants
Worksheet Resonance
Worksheet Impedance
Worksheet Inductors
Worksheet Inductance
Textbook Resonance in series-parallel circuits : Resonance
Textbook Series R, L, and C : Reactance And Impedance -- R, L, And C
Textbook Special-purpose diodes : Diodes And Rectifiers
Textbook Practical considerations : Inductors


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:19 AM.


User-posted content, unless source quoted, is licensed under a Creative Commons Public Domain License.
Powered by vBulletin
Copyright ©2000 - 2014, vBulletin Solutions, Inc.