Strantor's barter list

[strantor]

Ok guys, bad news. I got out the camera and the oscopes, got all set up to film, and neither of them work. They are both Tektronix 2445B 200mhz oscopes. When I first received them, the first one took several minutes for anything to be displayed on the CRT, then seemed to work fine - now it doesn't display anything, I waited maybe 10min. It goes through it's little self tests; lights cycle and it makes click noises, but nothing on CRT. The second one IIRC worked just fine; now, I plugged it in, it went through it's self test and displayed an error "test failed, press trig A/B to continue" - I pressed trig A/B and it went to o-scope screen and looked fine. While I was getting my function generator set up, the CRT went blank. I can't get it to come back on.
so... still interested? I'm not sure if I'm interested in letting them go like this though; I might be able to fix them easy and get a lot more for them. But I don't have time now...thinking out loud.

[strantor]

Originally Posted by Brownout

How did you collect all that wonderful stuff? And how are you allowed to keep it in the garage?

Took a while. My wife understands the garage is my area, so there are no problems.

[strantor]

Originally Posted by jimkeith

I'll take the DC drives, but must find something you need first.

The DC drives, I have 2 dayton 6z812A. One has a lifted PCB power trace and the status of the other one is "unknown". I have one older dayton scr control (like this one) status also unknown. If you're interested, I'll test out the 2 unknowns and see about fixing the one with the lifted trace.

[R!f@@]

Originally Posted by strantor

The DC drives, I have 2 dayton 6z812A. One has a lifted PCB power trace and the status of the other one is "unknown". I have one older dayton scr control (like this one) status also unknown. If you're interested, I'll test out the 2 unknowns and see about fixing the one with the lifted trace.

Mind shipping them to me

[strantor]

Originally Posted by R!f@@

Mind shipping them to me

what you got to trade?

[stanman11]

what would your prices bee for

Sprockets
pullies
gears
toggle switches
solenoid valve

[strantor]

Originally Posted by stanman11

what would your prices bee for

Sprockets
pullies
gears
toggle switches
solenoid valve

sprockets/pullies/gears - I have a lot. need to know what you need, and I'll tell you if I have it. Otherwise, if you don't know what you need, tell me what you're trying to do and I'll lat you know if I have the stuff to do it.
solenoid valve - you want pneumatic or fluid? what coil type? what inlet size? directional or simple open/close? What pressure rating?

Toggle switch - I will have to find those

I'm going to be moving in the next month so I can't guarantee availability - I don't know completely what's going on right now.

[strantor]

large LCD displays
http://cgi.ebay.com/ws/eBayISAPI.dll...50#ht_422wt_97

Could use some feedback on my ebay post. This is the first time I've listed on ebay.

[strantor]

DC/DC converters
9-18V, 5V @10A out
http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1156

[maxpower097]

I could do some tradin. I'll make a list of stuff I gots to trade. Lots of older dev kits and IC's.