...of antenna substrate for our lab. The frequency scale of GHz around max 10 GHz or more.
The budget is around US$15000.
Could you recommend a device...
Max is the someone I was referring to. :p
...the internal one.
The problem with Universal motors is the rpm varies quite a bit with load without some kind of feedback based controller.
...might live a long and comfortable life.
ps, down 36 pounds from 221 (max). That's 185 and declining by a pound or three per month.
Thanks for commenting. So it is a normal occurrence I take it. I realize main power is not free energy. Hypothetically speaking if you were...
...a considerable 50Hz or 60Hz waveform displayed, the capacitive and/or inductive effect in the presence of a AC service can easily be detected.
...the OP intends or thinks that maybe connecting to one side of a AC service he may have a way of 'Harvesting' power at no cost or undetected??
...connected to several peripherals.
And provide sample programs in assy and C for the boards.
You can pick them up on ebay.
Also Olimex make some.
...coil has a resistance of 4-5 ohm and i set the load impedance in function generator as 5 ohms which gives me a max peak to peak voltage of 1.8
yeah I checked it Max. But the problem is that I'll have to construct all the circuits by myself. I won't be able to get these components locally....
Did you check the link in post#2?
Isn't 'Big Globs of Excess Solder' and Professional World' an oxymoron?:p
...at least from 0 to 100 times :) is that this problem is not about the maximum power transfer it's just about finding the max power, so your attempt...
+1 for me also, it's years since I used solder wick.
...source in general, we are just trying to find out how we can get the max power into the load when we can only vary the two resistors within a certain...
KINDLY GO THROUGH THE ATTACHMENT WHERE I TRIED TO SOLVE AND GOT STUCK IN THE MID.
...R2 given that the values can range from 0 to 100 ohms each to get the maximum possible power dissipation in the 50 ohm resistor.
This isnt your...
...up. Ik for every three LEDs I need a 22ohm resistor because my LEDs max power is 3.6 volts. I bought a rgb controller and it has four pins. One fire...
not all of them are load only load resistance 50 ohms is the load.
Separate names with a comma.