As I explained to someone else in another thread on the "Quote" button.
If you press "Reply" on a message it will include it as a quote in that...
Someone should point out that doublespeak was 30yrs ago!
Use Reply instead of quote.
...start to make sure it rotated in the correct direction, occasionally you would see a clock run backwards when the spring kick starter failed.
What you want is reply - this will let you quote a single post in reply.
...so far, what is wrong with the automatic method the way all the other sites do?
BTW it does not always work for me if a previous quote was used?
Well I took a bit of time (about 5 seconds) to work out how quoting works in this software. Click quote and then click Insert Quotes. Different YES,...
...can always change it"
I don't see any post when I hit "quote" ?
I am all for change, IF it is an improvement.
Hopefully all will be addressed?
...High F capacitor which has Voltage rating of at least 10V above you max. voltage.
LCD 7-seg display
...And if you want 46vdc as a final result, that would be 46vdc X 0.707 = 35vac required.
I don't know what are you telling ?
Voltage out 46vac x 1.414 = 65vdc.
...posts read, and just became light text, now once you read it it disappears from the list, so to go back to it takes more steps than usualy.
Can't seem to edit a recent post, also where is Subscribed Threads?
A little bit of a pain when you have a wide screen monitor in full screen mode without using Restore Down.!?
What CNC router and what/who's is the controller?
I see now you are latching both relays in until power is cycled so on the surface to me it looks good to go? :cool:
Those links do not appear to show feedback to enable fine positioning, which the OP specified in his post.
So what do you you think?
Might save OP some time.
And me, embarrassment!:p
...voltage varies between 10~16V, this will surely change the charging current but in most suitable case the converter should provide atleast 5amp max
Separate names with a comma.