...of 'ambiguous' results at best...
That would be the 'absolute maximum' specification (that is, in this case, the maximum G-S EMF that is guaranteed...
There is an integrated footprint editor which is simple to use.
I don't know; that information should be in the documentation.
...Quadcopter app that operates on Wi-Fi, most likely 2.5Ghz would work with a normal RC 2.5Ghz receiver?
You have at least 8 channel control.
...when I attempt it I get a block move menu, no matter what the settings, edge cuts layer set, I have tried it on two PC's with same result.
...across a couple of AB CNC, they never did that well in the CNC market, and did not appear to have that much of a support system in the company.
I started at boeing about 30 years ago, and back then, a lot of cnc was based on digital equipment corp pdp 8 and pdp11. some TI9900, and mostly...
VGS(th) Gate Threshold Voltage 3.0 ––– 5.0 V
PDF says min 3.0, max 5.0 v? I thought that was the turn on volt range?
Then it also says this...
That software BTW, I applied it and works like a charm.
...in Kicad, I initially thought this a great program, but I have a couple of glitches I cannot seem to overcome, using a stable BZR4022 version?
...track the direction of the signal.
-The transmitter will be set at a max distance of about 20-25 meters.
-The robot should get up to 20 cm from the...
Its likely two or a max of four of them and I actually don't have a power supply but I do have one of those DC-DC buck step up/down converters, so I...
How easy to create new footprints?
I just looked into the FreePCB, it does not appear to have a schematic editor? What formats does it accept?
They are very versatile and slick to work with.
The new technology in CNC is the CNC printer.
This material may also play a big part in the future .
There is a tutorial here and although it is in assembler, it may help with the concept.
You need some star dust and rustle up an east wind (Digikey)!
I think it should be moved to the Homework section!........mods!:(
...What got me was how they can call for and board elevators. Also, per Max I like what is going on in the automotive industry as well as CNC machining...
...the context of this thread though, note that the work was done at the Max Planck Institute for Meteorology in Hamburg which I think is publicly...
Separate names with a comma.