Have you found a post that gives the same voltage divider set-up for the Kindle Fire HD?

...Here's a schematic from the web that I refer to. It shows how to apply the proper voltages to the data pins, using voltage dividers. It's...

...be able to tell if we used a more sophisticated model or alternately apply full voltage to all the bulbs through a fast switching network, then...

...the LED. What is the Vf of the LED you chose? From there you can apply KVL ... and compute the resistance. Then choose the nearest E24 series...

Ok, thanks.

...simply trying to limit current through a DC device, the same rules apply as if you were limiting current through a resistive load (your inductor will...

I very much doubt this circuit will work as you expect. An SCR must reach 0V for it to turn off, and your circuit will discharge most of the...

...load across the meter input, say 10k ohm or so. But beware of how much voltage you apply across that resistor. 120V will dissipate close to 1.5W..

In the attachment the capacitor will charge to 1250V. Applying a 5V pulse (or whatever the SCR wants) to the SCR gate will dump the capacitors...

That is NOT the definition of an odd signal. That is, in fact, how you extract the even component of a generic signal. Notice the 'e' subscript --...

definition of odd signal is x_e=((x(t)+x(-t))/2 if we apply to negative integral we get x(t)=(\int ^0_{-\infty} x(t)dt +\int ^0_{-\infty} x(-t)dt)/2

See Strantor's strategy (prediction of the future of language). It will greatly reduce the effort put into developing AI. We all know, however, that...

...+ [2(1A)(2A)(10Ω)] + (2A)²(10Ω) = 10W + 40W + 50W = 90W If you apply superposition, you miss the term in square brackets, called the crossproduct...

...by each source and sum them up. What you cannot do us try to apply superposition since superposition only holds for properties that are linear and...

That sounds killer, but is probably above my skill level as of yet. I may think about trying it in the future though.

I just need a computer understands me like my wife does... ...it has to understand what I mean, not what I say.

...one from -∞ to zero and the other from zero to +∞, and then apply the definition of an odd signal to the first integral. What is the result.

..." will never exist... Unless some genius can teach a computer to apply discernment or reason in its programming { the chess computer doesn't count...

...gets to the set point, i´ll check the current for the relay and apply the corrections, in other circuit i notice people use both sides of the opamp...

Can you suggest any way to do it ? Since I cant have a 30V Vgs by using only 20V Solar Cell Should I change to P-MOSFET or some way ?

Separate names with a comma.