...therefore I want to be able to adjust the brightness. The transformer outputs 12v 2amp max.
Can someone tell me what to do? Many thanks in advance.
Sketchup is free.
...right, I think I can connect a digital pin that outputs (5V, 20mA(max) ) to control the mosfets. I could add a resistor to limit the current to 10mA,...
...I have atleast noise coming from the speaker. When I put the pot at max, the noise gets louder will I hit max, then nothing for a while, and then I...
...button, it should say 'Pushing the hand button' instead of 'Holding the Hand button' , otherwise the Hand Start button would seem redundant?
...examples of each instruction.
Mitsubishi has different commands to AB.
Too many to list, just a sample, If you don't see it, send PM.
...A SET RST or using just latching an output?
Nothing happens until you run the program and energise the latch.
Can you post an example rung?
...from the computer?
Are you aware that adjusting the volume control to MAX is going to cause incredible amounts of gain and turn this into a square...
Later engines often fire on every TDC rather than every other.
...think you've misunderstood the FET spec. The 130W rating refers to the maximum power the FET itself can dissipate as heat, and does not refer to the...
If you want the load has 100V max to output, the Q1 need to change to as an npn bjt to drive the pnp power bjt.
I think you're looking at it backwards. I think you need to spec the max frequency that you want to count. However, If you're chip is operating at...
thank u ^_^
the maximum prescaler on pic is 256
but am still wondering about the maximum frequency i can generate i read it they say its 50 million...
That was why I ask who controlled the current. If the op amp controls it I thought the direction not to be to important. But having...
How many cylinders?
...there to make sure that:
1. VGS for the IRF9640 (P-channel) is -12V max, and VGS for the IRFR120 (N-channel) is 12V max correct?
2. What about the...
Actually it was in the UK, H.F. 450Khz equipment, silver soldered the filler pipes in the Austin/Morris Mini gas tanks.:cool:
Largest tube I have worked with had a 3Kw cathode htr.
Separate names with a comma.