Where does the Actor/Director title fit in??:rolleyes:
...or 240v motors, in his case the motor had failed, ( seized up).
I had a spare motor, but I haven't opened the old motor up to see the cause yet.
All the ones I've seen were a synchronous motor driving a fully encased gearbox of the same pattern as used in timer switches.
These were the usual...
Frequency: 50-60 Hz
1 amp (max)
Holding Current: 40 mA (minimum)
Amp Inrush: 10
Adjustable Time Delay:...
So many good links and tips.
I would vote with Max, to check the gears.
They are usually plastic, and can fail from old age (like...
...connect to the battery (single pole double throw action).
Listen to MaxHeadRoom. It is more secure to wire them in series; for the reason Max...
That's very sketchy. I've had students solder better on their first attempts. Amazing some of the junk that is out there.
I have had similar SMT boards come from China that were obviously soldered crudely with a hand operated iron.
...all detect switches in series, in the parallel arrangement if a conductor or connection would open, that alarm position would cease to work.
...be to do with timers which I will alter to suit. Now I just need to program another conveyor to run very minute or so. Thanks a lot for you help Max
If the four radials are perfectly balanced, they will contribute nothing to radiation, but simply form the "negative terminal" of the antenna. The...
That makes a lot of sense when you put it that way. Max, thanks a lot. It is very appreciated.
...is no distinction, there should be nothing in the unit that would recognize whether it was 240v with two live conductors or live and neutral.
...off a 120v outlet, you would need a step up transformer, and reference one side of the secondary to ground to set up a neutral in this case..
They usually like between .1C and .3C max. So if I were you I would buy one sized for the 35 ah battery. The bigger one will still charge but will...
Thanks, basically what i was looking to do.
...right now for $1.00!
...battery will not accept 15 amps;
How do you figure out how many amps max a battery can handle incoming?
I mean max inrushing amps. Err, something...
thanks sir but its not possible for us to use ready made converter since its a school project also i need to put them piece by piece in a place so...
Separate names with a comma.