All About Circuits Forum

All About Circuits Forum (http://forum.allaboutcircuits.com/index.php)
-   Homework Help (http://forum.allaboutcircuits.com/forumdisplay.php?f=7)
-   -   Odd/Even numbers counter. (http://forum.allaboutcircuits.com/showthread.php?t=92491)

TheSpArK505 12-13-2013 05:11 PM

Odd/Even numbers counter.
 
Hello guys.

I need to design a counter that works as (even x=0/odd x=1) numbers counter. I,m having difficulties with state diagram.when I begin at 000,x=0 should I stay at this state and when x=0 should I go to 001. And what about the state after this,is it 001,x=0 I go to 010,when x=1 should I go to 011. Is that correct.

Help me please.

ScottWang 12-13-2013 05:45 PM

Converting all of the functions to the truth table, and using the truth table to build the circuit.

TheSpArK505 12-13-2013 06:36 PM

do you mean that the states transitions I mentioned are correct.

ScottWang 12-13-2013 07:04 PM

You can see the truth table of CD4518, and then talk about what you think.

CD4518 datasheet - to see the truth table on the first page..

tshuck 12-13-2013 07:45 PM

What does the prompt say? Since you are designing it, it could reasonably do any number of things and still count odd and even.

Does this count up? Down? How many bits (from your example, it looks like 3)? What approach? Synchronous?

You need to be much more specific.

WBahn 12-13-2013 08:57 PM

Quote:

Originally Posted by TheSpArK505 (Post 676186)
Hello guys.

I need to design a counter that works as (even x=0/odd x=1) numbers counter. I,m having difficulties with state diagram.when I begin at 000,x=0 should I stay at this state and when x=0 should I go to 001. And what about the state after this,is it 001,x=0 I go to 010,when x=1 should I go to 011. Is that correct.

Help me please.

You need to post your best effort at coming up with a state diagram.

Foe each state, describe what, precisely, being in that state means. A good way to do this is to finish the following statement for each state:

If you tell me that I am in state xxx, then I know yyy about the system.

djsfantasi 12-13-2013 10:06 PM

I am curious? What is "x"? Is it an input to the logic or an output from it?

And what is the three bit value you are showing? Is it the counter value? How does the circuit count? Is there a separate input to tell the circuit to count?

Try defining the obvious state transitions, first. The others may become clearer after that.

For example, if the counter value is 010 and x=0, what is the next state/value of the counter? Does it or does it not make sense to have the next state be 011?

Just trying to some clarity of your problem.


All times are GMT. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2003-2011, All About Circuits. All Rights Reserved.