All About Circuits - Newsgroup Archive Forum Index All About Circuits - Newsgroup Archive
These forums contain an archive of usenet posts relating to electronics. These usenet posts are a great resource. Click the 'search' link to search for a topic, or browse through the posts.
 
Back To: please note - you cannot post on these forums. this is a usenet archive, new posts are not permitted. please visit our forums to create a new post
   SearchSearch 
Circuit diagram of garage door remote control

 
   All About Circuits - Newsgroup Archive Forum Index -> sci.electronics.repair


Author Message
heja
Guest





PostPosted: Mon Sep 13, 2004 12:23 am    Post subject: Circuit diagram of garage door remote control

I own a Einhell garage door opener with remote control
It does not work anymore. It is transmitting continuously. Inside the
cabinet there is a microswitch that is operated by the battery door. When
this one is activated it starts transmitting and does not stop anymore.
Without a circuit diagram and part numbers removed from the two IC's on the
board it is very hard to find the problem.

Does anyone have a circuit diagram??

Type MS 433
Art-Nr 16.602.00
Back to top
James Sweet
Guest





PostPosted: Mon Sep 13, 2004 2:32 am    Post subject: Re: Circuit diagram of garage door remote control

"heja" <me_jang@hotmail.com> wrote in message
news:4144b037$0$818$3a628fcd@textreader.nntp.hccnet.nl...
Quote:
I own a Einhell garage door opener with remote control
It does not work anymore. It is transmitting continuously. Inside the
cabinet there is a microswitch that is operated by the battery door. When
this one is activated it starts transmitting and does not stop anymore.
Without a circuit diagram and part numbers removed from the two IC's on
the
board it is very hard to find the problem.

Does anyone have a circuit diagram??

Type MS 433
Art-Nr 16.602.00




If they've gone so far as to remove part numbers then there's certainly no
schematic available.
Back to top
Guest






PostPosted: Mon Sep 13, 2004 12:05 pm    Post subject: Re: Circuit diagram of garage door remote control

On Sun, 12 Sep 2004 22:23:32 +0200, "heja" <me_jang@hotmail.com>
wrote:

Quote:
I own a Einhell garage door opener with remote control
It does not work anymore. It is transmitting continuously. Inside the
cabinet there is a microswitch that is operated by the battery door. When
this one is activated it starts transmitting and does not stop anymore.
Without a circuit diagram and part numbers removed from the two IC's on the
board it is very hard to find the problem.

Does anyone have a circuit diagram??

Type MS 433
Art-Nr 16.602.00



Did you check the switch ?
Back to top
heja
Guest





PostPosted: Mon Sep 13, 2004 9:59 pm    Post subject: Re: Circuit diagram of garage door remote control

<yaya> schreef in bericht news:25lak09luqlumouqp7398fntm1i8bojet1@4ax.com...
Quote:
On Sun, 12 Sep 2004 22:23:32 +0200, "heja" <me_jang@hotmail.com
wrote:

I own a Einhell garage door opener with remote control
It does not work anymore. It is transmitting continuously. Inside the
cabinet there is a microswitch that is operated by the battery door. When
this one is activated it starts transmitting and does not stop anymore.
Without a circuit diagram and part numbers removed from the two IC's on
the
board it is very hard to find the problem.

Does anyone have a circuit diagram??

Type MS 433
Art-Nr 16.602.00



Did you check the switch ?

Yes, the switch is working well
Back to top
Jerry G.
Guest





PostPosted: Tue Sep 14, 2004 4:58 am    Post subject: Re: Circuit diagram of garage door remote control

These are proprietary. There are no parts or service information sold
from the manufacture. They do complete board replacement and adjustment
of the new board, and system to match. If the board is a newer
generation than your remotes, then these will also have to be changed.

You should check with one of the major installers for more information,
and get an estimate.

--

Jerry G.
======

"heja" <me_jang@hotmail.com> wrote in message
news:4144b037$0$818$3a628fcd@textreader.nntp.hccnet.nl...
I own a Einhell garage door opener with remote control
It does not work anymore. It is transmitting continuously. Inside the
cabinet there is a microswitch that is operated by the battery door.
When
this one is activated it starts transmitting and does not stop anymore.
Without a circuit diagram and part numbers removed from the two IC's on
the
board it is very hard to find the problem.

Does anyone have a circuit diagram??

Type MS 433
Art-Nr 16.602.00
Back to top
Display posts from previous:   
   All About Circuits - Newsgroup Archive Forum Index -> sci.electronics.repair All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


sitemap