Hi,
my old faithful fluke 77 multimeter has stopped reading DC and AC current.
It still reads Ohms, Volts and continuity, just not current.
I found this guide here...
http://assets.fluke.com/manuals/75_77___omeng0900.pdf
although it doesn't help that the 77 pcb is slightly different to the diagram shown. i.e. I don't have a couple of the components or two fuse holders in mine.
With components being tested with another multimeter still on the fluke 77 pcb, nothing seems to be faulty. I checked the fuseable resistors and i can't seem to find anything faulty.
Has anybody else had this problem or know what component could be at fault?
Thanks.
my old faithful fluke 77 multimeter has stopped reading DC and AC current.
It still reads Ohms, Volts and continuity, just not current.
I found this guide here...
http://assets.fluke.com/manuals/75_77___omeng0900.pdf
although it doesn't help that the 77 pcb is slightly different to the diagram shown. i.e. I don't have a couple of the components or two fuse holders in mine.
With components being tested with another multimeter still on the fluke 77 pcb, nothing seems to be faulty. I checked the fuseable resistors and i can't seem to find anything faulty.
Has anybody else had this problem or know what component could be at fault?
Thanks.